FMEA vs. FMECA: what changes when you add criticality
A failure mode and effects analysis (FMEA) is a structured way to list how an item fails, what those failures do, and what you might do about them. A failure mode, effects, and criticality analysis (FMECA) does the same work and then ranks the modes by some measure of criticality so the important ones are not lost in a long worksheet.
IEC 60812 is the current international reference for both. MIL-STD-1629A is the historic U.S. military FMECA standard. It has been cancelled, but many plants still recognize its language. Neither standard is a certification, and using a standard’s worksheet does not make a file “compliant” in any official sense.
Criticality analysis can use defined qualitative consequence/likelihood categories or a documented quantitative model when the evidence supports one. Some FMEA methods also use risk priority numbers (RPNs); adding an RPN column alone does not establish that the analysis answers a FMECA decision. Ordinal severity, occurrence and detection scores are not measured probabilities or expected costs, and identical products can conceal very different consequences. Define the method, keep serious safety and environmental consequences visible, and record uncertainty.
RCM uses failure modes too, but it insists on functions and consequences first. An equipment FMEA can feed an RCM analysis; it is not a substitute for one. See FMEA and FMECA consulting and the Failure Mode Library.
Worked decision: frequency is only one part of priority
Original illustrative example, not customer data or a standards-prescribed calculation. A team reviews three modes on one pumping system over a common one-year planning horizon. These figures are assumptions for the exercise, not failure-rate data from the library.
- A benign-service seal leak is assumed to occur four times per year at $500 per event: $2,000/year of direct cost.
- A coupling failure is assumed to occur 0.25 times per year at $20,000 per event: $5,000/year of direct cost. The lower event frequency does not make it the lower-cost mode.
- A protective trip can fail without operators noticing. Its probability and hazard consequence have not been established. Leave the financial rank unresolved and send it for competent hazard/protection review; do not assign a zero because the cost is unknown.
The FMEA records functions, modes, local/system effects and existing controls. The criticality step makes the decision basis explicit: economic priorities for the first two modes, and a separate safety decision for the protective function. Neither the dollar comparison nor a multiplied score authorizes accepting a hazard.
Choose the analysis around the decision
- Use FMEA to identify and document credible modes, effects and controls. Start with operating context and boundaries.
- Add criticality analysis when the team must compare consequences and likelihood across modes. Document ranking definitions, evidence, uncertainty and exceptions.
- Use RCM decision logic when choosing whether a preventive, condition-directed or failure-finding task is applicable and effective. A high score alone does not choose the task or its interval.
Source and review notes
Public guidance reviewed November 14, 2026: NASA GSFC-HDBK-8004, Failure Modes, Effects and Criticality Analysis. Its mission-specific likelihood and consequence scales are not universal plant scoring rules. Obtain the applicable standard before claiming conformance. No source tables or figures are reproduced here.
Related reading
- Centrifugal pump failure modes
- What is RCM?
- FMEA / FMECA service